Data Extractor

How to use PC-3000 Portable III incorrectly and lose your warranty

Posted on 12/13/2022 by ACELab team

The ports of PC-3000 Portable III (Port 0, 1, 2) function using high-speed PCIe-1, 2 and SATA-1, 2, 3 protocols thus providing for the data transfer rates up to 5 and 6 Gbit/s respectively, i.e. effectively the data transfer rate … Continue reading →

Posted in Articles, Data Extractor, PC-3000 HDD, PC-3000 SSD | Tagged | Leave a comment

PC-3000 SAS. List of supported hard drives

Posted on 12/12/2022 by ACELab team

        PC-3000 SAS can work with SAS and SCSI drives (requires an additional third-party SCSI adapter). PC-3000 Portable III with SAS Adapter and Utilities is able to work only with native SAS drives and does not support … Continue reading →

Posted in Data Extractor, PC-3000 HDD | 8 Comments

PC-3000 HDD. List of supported HDD families (7.5.x)

Posted on 12/12/2022 by ACELab team

 

Posted in Data Extractor | 1 Comment

PC-3000 for HDD. How to unlock SED on WD SMR drives without a special board

Posted on 07/28/2022 by ACELab team

Hello dear friends, In June 2022, we released a new PC-3000 software version 7.1.x,  and one of the main features in this update is the SED unlocking option for new WD SMR families. It means that now you don’t need to … Continue reading →

Posted in Data Extractor, PC-3000 HDD | Tagged , , | 6 Comments

Western Digital: Time-Limited Error Recovery

Posted on 01/26/2022 by ACELab team

Bad sectors may appear because of the bad quality of the heads or due to small scratches on the surface of the platters. This problem is pretty up-to-date and sometimes, when you don’t have an opportunity to replace the heads … Continue reading →

Posted in Data Extractor | 2 Comments

The Alternative Way of Recovering Data from a Burnt SSD

Posted on 09/16/2021 by ACELab team

Hello everybody! Sometimes, when the proven solutions can’t be applied to your problem, you need to change the approach and experiment a little. Let’s discuss the alternative method of data recovery from a burnt SSD.

Posted in Data Extractor, PC-3000 HDD, PC-3000 SSD | 1 Comment

PC-3000 Flash. The Tesla Car Case

Posted on 07/20/2021 by ACELab team

Hello everybody! Worn-out NAND Flash chips are a common issue when we are speaking about data recovery from USB Flash devices. Nowadays chips may have low quality even from the factory. Your pendrive may die less than in a month … Continue reading →

Posted in Data Extractor | 3 Comments

PC-3000 Flash Spider Board Adapter. Automatic Pin Sequence Detection for the Monolith Bus Line

Posted on 04/21/2021 by ACELab team

Dear friends, If you have ever dealt with monolithic data recovery, you have definitely faced the necessity to find out the order of the bus line pins. Previously, if you had not known the order of the bus line pins … Continue reading →

Posted in Data Extractor | Leave a comment

PC-3000 Portable III. Recovering Data from Logically Damaged Plextor PX-512M8SeY with a New PCIe x16 SSD Adapter

Posted on 09/16/2020 by ACELab team

Hello Friends! As you know, the PC-3000 Portable III supports the PCIe SSDs along with the SATA-based devices. Also, thanks to the new adapters and software updates, we constantly add new drives to the supported list. In September 2020, we … Continue reading →

Posted in Articles, Data Extractor, PC-3000 SSD | Tagged , , , , , , , , | 2 Comments

PC-3000 Data Extractor. How to Merge a Sequence of Bin Files into One Image File

Posted on 07/22/2020 by ACELab team

Hello friends! Let’s imagine the following situation: After you have finished recovering data, you get only a sequence of binary files which contains recovered raw data that were deleted or corrupted (e.g. task.prm, map.bin, and other files related to the … Continue reading →

Posted in Articles, Data Extractor | 4 Comments